6

3.Move the cursor to the rectangle with the misspelled word MANI and change the name to MAIN. Press the F4 Accept key to confirm the change.

4.The corrected picture directory should now be displayed.

5.The Startup picture is the picture that is displayed on the screen as soon as the Panel is switched on in Run Mode or after a reset. The picture that is in position 0 of the picture directory is always used as the startup picture. If the MAIN picture is not in this position, you should move it to the first position in the list:

To do this move the cursor to the MAIN picture.

Press F7 Back to push the MAIN picture up to the top of the list.

Press F10 to return to the Main menu when you have finished editing the Picture List.

Caution

Make sure that the picture in the first position is never the same as the picture defined as the communication error picture in the project editor.

Further information on the use and the operation of the project editor can be found in the PANELWARE™ Configuration Software Reference Manual (GFK-0849).

GFK-1115

Chapter 6 Demo Project

6 - 57

Page 153
Image 153
GE Monogram manual GFK-1115 Demo Project