3

Select the Display Type entry and press ↵ to display a window that lists all display types. Select one of the display types (in the example, LCD 4x20) and press ↵.

The cursor jumps to the next line, Number of Keyblock Modules. Enter a number (1 through 7) and press ↵ to confirm the number of Keyblock modules in your configuration (e.g., 2).

The next step is to define the individual Keyblock modules (not all of the modules in the list have to be defined). When the cursor is in one of the Type Keyblock Module x lines, you can access a selection window that lists the Keyblock modules by pressing ↵.

For this example, select the numeric (12+4) and the 16-key Keyblock modules as Keyblocks 1 and 2, respectively. The following table defines the numbers in the Keyblock Module selection window:

Table 3 - 1. Keyblock Module Definitions

List Entry

Keyblock Module

16

16-key Keyblock module

12+4

Numeric Keyblock module

8

8-key Keyblock module

4

4-key Keyblock module

3 - 12

PANELWARE MMI Application Manual for GE Fanuc Genius Protocol - June 1995

GFK-1115

Page 36
Image 36
GE Monogram GFK-1115 manual Keyblock Module Definitions, List Entry Keyblock Module