6 |
6.Insert an output field into the picture. The value that is entered in the second input field will be displayed in this output field. This is done as follows:
●Position the cursor at (10,7).
●Press F2 Field.
●Select the Output Field entry from the Field class window and press the ↵ key.
●Select the entry Output Word (signed) from Select field type window. This opens a window in which you can enter or change the parameters for the selected input field:
●Now, enter OUT_INT as the Destination Tagname and confirm your entry with ↵.The declaration of this address is done along with all other variables in the connection editor (see “Connections” in this chapter).
●In order to display preceding zeros, move the cursor to the Display leading zeros line. Enter Y and then ↵ to activate the preceding zero display.
●End the entry with F4 Accept. The window Output Word (signed) is closed. The output field is then seen in the picture:
6 - 32 | PANELWARE MMI Application Manual for GE Fanuc Genius Protocol - June 1995 |
