
6 |
5.Insert an output field that will display the value that is entered in the first input field, into the picture. This is done as follows:
●
●
●
●
Position the cursor at (11,6).
Press F2 Field.
Select the Output Field from the Field Class window and press the ↵ key.
Select the Output Word (unsigned) from Select Field Type, which opens the window in which the parameters for the selected input field can be entered/changed:
●
●
●
Enter OUT_WORD as the Destination Tagname and confirm the entry by pressing ↵. The declaration of this address is done collectively for all variables in the connection editor (see “ Editing the Connections” in this chapter).
To display preceding zeros, move the cursor to the Display leading zeros line and enter Y followed by ↵ to activate the leading zeros display.
End the definition with F4 Accept. The Output Word (unsigned) window is closed. The output field is displayed again:
| Chapter 6 Demo Project | 6 - 31 |