6

Section 2 Required Hardware

The following PANELWARE hardware components are required for the demo project (see the PANELWARE™ Hardware Installation User’s Manual –GFK-0848):

1 - C400 Panel Controller

1 - 8 x 40 LCD Display Module

1 - 12+4 key Keyblock Module

1 - 16 key Keyblock Module

1 - connection cable between the PC and the Panel

1 - connection cable between the Panel and the PLC (see Appendix A)

Assemble these modules according to the instructions in the PANELWARE™ Hardware Installation User’s Manual (GFK-0848). Ensure that the 12+4 Keyblock module is the first Keyblock module that is attached directly to the Panel Controller.

Note

The numeric Keyblock module shown throughout the following sections may not look like yours, which may not have the E and C keys. Instead, the E key (ENTER) may be the ↵ symbol and the C key (CLEAR) may be the ← symbol.

The assembled Panel should look like the following figure:

GFK-1115

Chapter 6 Demo Project

6 - 3

Page 99
Image 99
GE Monogram GFK-1115 manual Required Hardware