6

Press F4 to confirm the field parameters and to close the Input Word (unsigned). The input field for the Year (YYYY) is displayed in the picture:

6.Next, the key functions must be defined. By pressing F1 or F2, the internal variable

TIME_SET or DATE_SET is written to with value 1 to set the time or date of the real time clock with the entered values.

While a project is running, pressing a key that has an assigned function writes a predefined value to a certain memory location (in the PLC or Panel).

Press the F5 Key function key. All Keyblock modules in the project are shown:

The four upper keys of the left-hand Keyblock module are defined as function keys F1 to

F4 (see page 6-22).

Move the cursor to the top left-hand key of Keyblock module 2 (Left module). Press

F1 Key Function. All key functions can be seen in the following window:

Select the function Set Bit/Byte (the internal variable has data type Byte unsigned) and press ↵. The PLC address and the value that is to be transmitted to the PLC should be

entered in the window that appears.

Enter TIME_SET/DI for the Tagname and press the ↵ key. Enter 1 in the Value 1 line and press ↵.

6 - 38

PANELWARE MMI Application Manual for GE Fanuc Genius Protocol - June 1995

GFK-1115

Page 134
Image 134
GE Monogram GFK-1115 manual