
6 |
T i p
If the field ends up in the wrong position in your picture, you can easily move it. First, move the cursor into the field. With key combination Ctrl + Cursor key, the field can be moved to the desired position.
4.Now, insert an input field into the picture in which a value — data format: Word (signed) — can be entered directly through the Panel Keyblock. This is done as follows:
●Position the cursor at (10,3).
●Press F2 Field.
●Select the Input Field option from the Field Class window and then press the ↵ key.
●From the Select Field Type window, choose the Input Word (signed) option, which opens a window for defining the parameters for the selected input field:
●Enter INP_INT as the Destination Tagname and confirm the entry by pressing ↵. The declaration of this address is done collectively for all variables in the connection editor.
●Do not change any more parameters. End the definition with F4 Accept. The Input Word (signed) window is closed. The input field can now be seen in the picture:
6 - 30 | PANELWARE MMI Application Manual for GE Fanuc Genius Protocol - June 1995 |