6

Genius Internal Connection

To display the Genius Internal variables used in your project, move the cursor in the connection list to the connection GI GENIUS Genius Internal and press F5 VAT or ↵:

If you have made all entries correctly If you have made all entries correctly, your screen should look like the screen shown above. Compare the variable names and the corresponding Panel data types. If the variable assignment table is different from the one above, make the required changes. Possible errors and their corrections are:

Wrong Name:

Change the address in the respective picture/field.

Wrong Panel Data Type:

You have used a field with the incorrect data type in a picture. Delete the field and its entry in the VAT and then insert the desired field.

Every variable must be assigned to a PLC address and a PLC variable type now. A detailed explanation is provided in chapter 5. Assign following PLC addresses to the symbolic names:

Symbolic Name

GLB_BIT_01

Panel Data Type

Byte unsigned

PLC Address

GQ0001

PLC Variable Type

BIT

By pressing the F10 Exit function key, or the Esc key, the VAT is closed for the Genius Internal connection.

6 - 62

PANELWARE MMI Application Manual for GE Fanuc Genius Protocol - June 1995

GFK-1115

Page 158
Image 158
GE Monogram GFK-1115 manual Genius Internal Connection