HP Application Recovery Manager Cell Manager Windows Media Kit manual Stop, Status, Startmon

Displays the version of the omnisv command.

-help

Displays the usage synopsis of the omnisv command.

-start

Starts the Application Recovery Manager services (on Windows) and adds the omnitrig command to the cron table, thus configuring it as a cron job (on UNIX).

-stop

Stops the services (on Windows) and removes the omnitrig command from the cron table (on UNIX).

-status

Displays the status and PID of the services.

-start_mon

Waits in loop until the CRS, MMD, and RDS services are up and running. If any daemon or service stops, omnisv exits with an exit code 1. Exit code 0 means that all relevant Application Recovery Manager daemons/services are up and running, whereas the exit code 1 means that at least one of the relevant Application Recovery Manager daemons or services is not running.

NOTES

On Windows systems, only the users in the Application Recovery Manager admin group can execute this command. On HP-UX systems, only the root user can execute this command. This command can only be used locally on the Cell Manager. It is not possible to start or stop services on a cluster using this command.

SEE ALSO

omnicc(1), omnicellinfo(1), omnicheck(1M), omnidlc(1M), omniinstlic(1M)

140