client_1 failed to connect to client_2
checking connection between client_1 and client_2 all checks completed successfully. number_of_failed_checks checks failed.
client is not a member of the cell.
client contacted, but is apparently an older version. Hostname is not checked.
Additional return values of the omnicheck command used to list the Application Recovery Manager patches are:
List of patches found on host client
Patch level Patch description
Number of patches found: number_of_patches
List of patches on host client is not available.
Host client is not a member of this cell.
Host client is unreachable.
NOTES
The omnicheck command can be used only within one Application Recovery Manager cell.
EXAMPLES
1.To check DNS connections needed for normal Application Recovery Manager operating (the Cell Manager resolves DNS connections to every Application Recovery Manager client in the cell properly and vice versa), run:
omnicheck -dns
2.To check if the client with the hostname backup.system.com resolves DNS connections to every Application Recovery Manager client in the same cell properly and vice versa and to get all relevant messages, run:
omnicheck
3.To list the patches installed on client with the hostname backup.system.com, run:
Command line interface reference | 105 |
