HP Application Recovery Manager Cell Manager Windows Media Kit manual VSSOptions

VSS_Options

-conf_check {strict non-strict disabled}

Sets the configuration check mode. If the check fails, the instant recovery session will fail. Select the strict mode to check each file or directory. Select the non-strictmode to check each folder. Disable configuration check only if instant recovery cannot be performed with an enabled configuration check and only if you are sure that this will not result in a loss of data during the instant recovery. In this case, you will lose the data that does not belong to a component, but resides on the same volume.

-use_vds

Switches a replica from the specified backup session with the source volume. Once switched, the replica is not available for another instant recovery session and also information about this replica is deleted from the database (VSSDB). Does not use a ZDB array specific options or agents. This option must be used after the backup created with the XP provider in the VSS compliant mode.

-no_retain_source

Overwrites the source volume during the switch or copy process.

Caution: If this option is specified and the instant recovery session fails, the original data on the source volume will be lost.

Important: In the case of restore using HP StorageWorks Disk Array XP (after the backup created with the XP provider in the resync mode), this option must be specified since there is no possibility to retain the source during re-synchronization of replica and source disks.

-manual_restore ScriptName

Executes a custom script instead of performing instant recovery. The script must reside on the application system in the directory AppRM_home\bin, and must exit with the exit code 0 in order to enable successful session completion.

-no_recovery

Leaves the application database in the recovery mode after completion of the instant recovery session, enabling you to manually apply transaction logs to the database.

Exchange_Specific_Options

-exch_check

Performs the consistency check of the Microsoft Exchange Server database replicated datafiles. The Microsoft Exchange Server database backup is considered as successful only if the consistency check succeeds. Use this option if consistency check was not performed during backup.

-exch_throttle Value

74