HP Application Recovery Manager Cell Manager Windows Media Kit manual

Specifies that the current omnidbxp command is executed only for the LDEVs pairs marked for the instant recovery in the XPDB. If this option is not specified, the current command is executed for all LDEVs pairs in the XPDB.

-session -list

Lists all available sessions in the XPDB.

-session -show sessionID

Lists all backup system S-VOL LDEVs that were involved in the session with the sessionID.

-ldev -list

Lists all S-VOL LDEVs in the XPDB together with their corresponding backup sessionID.

-ldev -show SEQ LDEV

Lists all available XPDB information about the specified S-VOL LDEV. The following information is listed: sessionID, CRC, IRflag, primary XP #, primary LDEV #, primary port #, mirror type, MU#, date and time, application system and backup system hostnames.

-cm-addserial {CU:LDEV LDEV} hostname [instance]

Adds the command device identified by the serial number of the HP StorageWorks Disk Array XP (serial) and serial number of command device in the hexadecimal or decimal format (CU:LDEV or LDEV) to the XPDB, and assigns it the hostname of the system accessing it (hostname) and optionally the instance number (instance). If the instance number is not specified, Application Recovery Manager assigns the lowest not yet assigned instance number.

The instance number must be any number in the range between 301 and 399.

The command does not check whether the specified command device or system exist, it only checks if the optional instance number specified is within the correct range and if the command device together with the instance number is not already assigned to be used by some other system. If checks fail, the command fails with an appropriate error message.

-cm-updateserial {CU:LDEV LDEV} hostname [instance]

Updates the XPDB information about the command device identified by the serial number of the HP StorageWorks Disk Array XP (serial), serial number of command device in the hexadecimal or decimal format (CU:LDEV or LDEV) and the specified hostname of the system accessing it (hostname), by assigning the newly specified instance number (instance) to the HP StorageWorks Disk Array XP serial number, serial number of command device and hostname combination. If the instance number is not specified, Application Recovery Manager assigns the lowest not yet assigned instance number.

The instance number must be any number in the range between 301 and 399.

68