HP Application Recovery Manager Cell Manager Windows Media Kit manual Return Values

-no_monitor

By default, the command monitors the session and displays the status of the session during the session. If this option is used, only the SessionKey is displayed, and the command is disconnected from the session.

RETURN VALUES

See the man page omniintro for return values.

Additional return values of the omnib command are:

10There was an error while backing up some components. All agents completed successfully.

11One or more agents failed, or there was a database error.

12None of the agents completed the operation; session was aborted by Application Recovery Manager.

13Session was aborted by user.

EXAMPLES

The following examples illustrate how the omnib command works:

1.To start a copy backup using an existing VSS backup specification called “test”: omnib -msvssw_list test -barmode copy

2.To start a backup using an existing SAP R/3 backup specification called “sap2”: omnib –sap_list sap2 –no_monitor

SEE ALSO

omnir(1)

Command line interface reference 33