HP Application Recovery Manager Cell Manager Windows Media Kit Vssdiskarrayxpoptions -copyback

dismounted, SMIS-S Agent will force dismount if the option is selected. Otherwise, instant recovery fails.

VSS_ENTERPRISE_VIRTUAL_ARRAY_OPTIONS

-no_copy_back

If this option is specified, a replica from the specified backup session is switched with the source volume. Once used, the replica is not available for another instant recovery session.

-copy_back

If this option is specified, copy back is performed. This is also the default behavior when neither -no_copy_backnor -copy_backis specified.

—diskarray_wait Minutes

If this option is specified, there is a delay before the background processes can run. The duration of the delay (in minutes) is determined by Minutes. This is also the default behavior when neither -diskarray_waitnor -no_diskarray_waitare specified, in which case there is a 60–minute delay.

-delete_replica

If this option is specified, the replica from which data was restored is deleted from the disk array after restore.

-no_diskarray_wait

If this option is specified, the background processes, such as integrity check, will not stop during the copy creation. This may cause a slowdown of the copy process.

-no_retain_source

Overwrites the source volume during the switch or copy process.

Caution: If this option is specified and the instant recovery session fails, the original data on the source volume will be lost.

VSS_DISK_ARRAY_XP_OPTIONS -copy_back

Performs resynchronization of the disk pair, copying data from the target volume (backup disk) to the source volume. This option must be specified if the data was backed up with VSS provider in the resync mode.

-no_retain_source

Overwrites the source volume. This option must be specified if the data was backed up with VSS provider in the resync mode.

Caution: If this option is specified and the instant recovery session fails, the original data on the source volume will be lost.

Command line interface reference 79