Prepares the EVA disk group pairs configuration file for editing by reading the contents of the file from the SMISDB and saving it under filename.
-dgrules -check EVA_name DG_name
Provides the information on the disk group that is in pair with the disk group identified by the EVA_name and DG_name. The command returns the information on the 1st disk group name, 2nd disk group name, and EVA name. If there is no rule for the specified disk group, the first and the second disk groups are the same.
-show -session SessionID
Lists expanded details of a session (identified by the backup session ID). The output of the command is the information on all target volumes created in the specified backup session. The following is displayed:
-Name, ID, and WWN of the target volume created in the backup session
-Name and ID of the EVA storage system on which the target volume was created
-Type of the target volume created
-ID of the source volume used in the backup session
-The backup session ID
-Time stamp of the target volume
-IR flag
-Name of the backup specification used in the backup session
-Names of the application and backup systems involved in the backup session
-If the session is excluded from use
-After instant recovery, if the source volumes (originals) are retained.
Note that you will get the same output if you run the omnidbsmis
-show -datalist DatalistName
Lists all replicas that are part of the replica set, which is identified by the backup specification name. Replicas displayed are identified by their backup session IDs. Note that you will get the same output if you run the omnidbsmis
-list -session [—ir] [-excluded] [–original]
Lists all replicas that are part of a replica set, together with the backup session IDs and the backup specification names. Note that you will get the same output if you run the omnidbsmis
If used together with the
Command line interface reference | 55 |
