When collecting or deleting files or when displaying the required disk space, additional criteria can be defined to limit the files selection. Thus, it is possible to exclude the getinfo file, the log files, the debug files or any combination of the three groups of files from the selection.
Using the command, the collected files can then be additionally packed to be sent to the support center. The command provides also a means of unpacking the packed collected files.
OPTIONS
Displays the version of the omnidlc command.
Displays the usage synopsis of the omnidlc command.
-session sessionID
Limits the collected debug files to those that were produced during the Application Recovery Manager session identified by the sessionID.
-did debugID
Limits the collected debug files to those identified by the debugID.
-postfix string
Limits the collected debug files to the specified debug postfix.
-no_filter
Does not limit (select) the collected debug files.
-hosts list
Limits the files to be collected to the clients specified in the list. The hostnames must be separated by spaces. The debug files collected are still subject to
-pack filename
All collected files are, by default (if this option is not specified), packed and saved in the current directory as the dlc.pck file. If this option is specified, the collected files are packed and saved in the specified file in the current directory on the Cell Manager. If the full path name is specified, the files are packed and saved in the specified file in the specified directory.
To add files other than the collected files to the package, copy the files to one of the following directories before running the command: dlc/client/getinfo, dlc/client/log, or dlc/client/tmp (on UNIX), or .\dlc\client\getinfo, .\dlc\client\log, or .\dlc\client\tmp
Command line interface reference | 121 |
