To send a color fax from the control panel
1.Load your originals print side up into the document feeder tray. If you are sending a
NOTE: If you are sending a
2.Enter the fax number by using the keypad.
TIP: To add a pause in the fax number you are entering, press the Symbols
(*)button repeatedly until a dash
3.Press Start Fax Color.
•If the device detects an original loaded in the automatic document feeder, the HP
•If the device does not detect an original loaded in the automatic document feeder, the Feeder Empty prompt appears. Make sure your original is loaded
print side down on the glass, and then press to highlight Fax original from scanner glass, and press OK.
NOTE: If the recipient's fax machine only supports
Change the fax resolution and Lighter/Darker settings
You can change the Resolution and Lighter/Darker settings for documents that you are faxing.
NOTE: These settings do not affect copy settings. Copy resolution and lightness/ darkness are set independently from fax resolution and lightness/darkness. Also, the settings that you change from the control panel do not affect faxes you send from your computer.
This section contains the following topics:
•Change the Lighter/Darker setting
Change the fax resolution
The Resolution setting affects the transmission speed and quality of faxed
NOTE: You can only change the resolution for faxes that you are sending in black and white. The HP
Fax
Send a fax | 137 |