Solution:
NOTE: This possible solution applies only in the countries/regions that receive
a
To send a fax manually, the telephone must be connected directly to the port labeled
1Telephone wall jack
2Use the phone cord supplied in the box with the HP
3Telephone
For more information on setting up the HP
Cause: The Fax Speed setting might be set too fast.
Solution: Try setting the Fax Speed to Medium (14400) or Slow (9600), and then resend the fax.
For more information, see:
“Set the fax speed” on page 30
Cause: The HP
Solution: If you did not load an original in the document feeder tray, or if the original is not pushed in far enough, you will be unable to send a fax manually. Load an original in the document feeder tray, or push the original farther into the tray. Once the HP All-
Fax troubleshooting | 227 |
Troubleshooting