Chapter 15

Cannot load paper from input tray

Cause: There is not enough paper in the input tray.

Solution: If the HP All-in-One is out of paper or there are only a few sheets remaining, load more paper in the input tray. If there is paper in the input tray, remove the paper, tap the stack of paper against a flat surface, and reload the paper into the input tray. Follow the prompts on the display or the computer screen to continue your print job.

For more information, see:

“Load full-size paper” on page 76

Ink is drying

Cause: Transparencies and some other media require a drying time that is longer than normal.

Solution: Leave the sheet in the output tray until the message disappears. If it is necessary to remove the printed sheet before the message disappears, carefully hold the printed sheet on the underside or the edges, and place it on a flat surface to dry.

Out of paper

Cause: There is not enough paper in the input tray.

Solution: If the HP All-in-One is out of paper or there are only a few sheets remaining, load more paper in the input tray. If there is paper in the input tray, remove the paper, tap the stack of paper against a flat surface, and reload the paper into the input tray. Follow the prompts on the display or the computer screen to continue your print job.

For more information, see:

“Load full-size paper” on page 76

Troubleshooting

Cause: The Two-sided printing accessory is not connected to the HP All-in-One.

Solution: If you removed the Two-sided printing accessory to clear a paper jam, replace it.

For more information, see:

“Clear paper jams” on page 171

Paper jam, misfeed or blocked print head assembly

Cause: Paper has jammed the HP All-in-One.

Solution: Clear the jam. To continue your print job, press OK on the control panel of the HP All-in-One.

268 Troubleshooting