Chapter 6

To load an original in the document feeder tray

1.Load your original, with the print side up, into the document feeder tray. Slide the paper into the automatic document feeder until you hear a beep or see a message on the display indicating that the HP All-in-One detected the pages you loaded.

If you are loading legal paper, flip open the feeder tray extender before loading the paper.

TIP: For more help on loading originals in the automatic document feeder, refer to the diagram engraved in the document feeder tray.

2.Slide the paper guides inward until they stop at the left and right edges of the paper.

NOTE: Remove all originals from the document feeder tray before lifting the lid on the HP All-in-One.

originals Load load and paper

Load an original on the glass

You can copy, scan, or fax up to letter- or A4-size originals by loading them on the glass. If your original is legal-size or contains multiple full-size pages, load it in the automatic document feeder.

NOTE: Many of the special features will not work correctly if the glass and lid backing are not clean.

To load an original on the glass

1.Remove all originals from the document feeder tray, and then lift the lid on the HP All- in-One.

2.Load your original print side down on the right front corner of the glass.

TIP: For more help on loading an original, refer to the engraved guides along the edge of the glass.

72 Load originals and load paper