5.When you have finished entering a name for the HP
The name you entered will appear on your Bluetooth device when you connect to the HP
6.Press OK to exit the Setup menu.
Related topics
Set Bluetooth security for the HP
You can enable printer security settings through the Bluetooth menu on the HP
•Require passkey authentication prior to someone printing to the HP
•Make the HP
This section contains the following topics:
•Use a passkey to authenticate Bluetooth devices
Finish setup
Use a passkey to authenticate Bluetooth devices
You can set the security level of the HP
•Low: This is the default security setting. Low level security does not require a passkey, as it does not support authentication. Any Bluetooth device within range can print to it.
•High: High level security requires a passkey, as it supports authentication. The Bluetooth device must provide a passkey, before the HP
NOTE: The HP
To set the HP
1.On the control panel of the HP
2.Press until Bluetooth is highlighted, and then press OK.
3.Press until Passkey is highlighted, and then press OK.
4.Use the keypad to enter a new passkey.
NOTE: The passkey must be 1 to 4 characters long, and can only consist of numbers.
5.When you have finished entering your passkey, press OK. The Bluetooth menu appears.
Computer connection information | 33 |