Chapter 4
setup Finish
Use the Embedded Web Server
If your computer is connected to an HP
a
For information on how to use the features available in the Embedded Web Server, including Webscan, see the onscreen help within the Embedded Web Server. To access Embedded Web Server help, open the Embedded Web Server, then click the Help link under Other Links on the Embedded Web Server Home tab.
NOTE: Use the Embedded Web Server to change network settings not available on the control panel.
This section contains the following topics:
Access the Embedded Web Server
The computer you use to access the Embedded Web Server on the HP
To access the Embedded Web Server
1.Print a network configuration page to find the IP address for the HP
2.In the Address box in your Web browser on your computer, type the IP address of the HP
The Embedded Web Server Home page appears, showing information for the HP All-
NOTE: If you are using a proxy server in your browser, you might need to disable it to access the Embedded Web Server.
3.If you need to change the language displayed in the Embedded Web Server, do the following:
a. Click the Settings tab.
b. Click Select Language in the Settings navigation menu.
c. In the Select Language list, click the appropriate language. d. Click Apply.
4.Click the Home tab to access device and network information, or click the Networking tab to access more network information or to modify network information.
5.Make any configuration changes.
6.Close the Embedded Web Server.
Related topics
52 Finish setting up the HP