Chapter 4

(continued)

Norway

www.hp.no/faxconfig

 

 

Ireland

www.hp.com/ie/faxconfig

 

 

France

www.hp.com/fr/faxconfig

 

 

Italy

www.hp.com/it/faxconfig

 

 

Change settings on the HP All-in-One to receive faxes

In order to receive faxes successfully, you might need to change some settings on the HP All-in-One. If you are unsure which setting to choose for a specific fax option, refer to the detailed fax setup instructions provided in the printed documentation.

This section contains the following topics:

•Set the answer mode

•Set the number of rings before answering

•Change the answer ring pattern for distinctive ringing

Set the answer mode

The answer mode determines whether the HP All-in-One answers incoming calls or not.

•Turn on the Auto Answer setting if you want the HP All-in-One to answer faxes automatically. The HP All-in-One will answer all incoming calls and faxes.

•Turn off the Auto Answer setting if you want to receive faxes manually. You must be available to respond in person to the incoming fax call or the HP All-in-One will not receive faxes.

To set the answer mode

▲Press Auto Answer to turn the light on or off, as appropriate for your setup. When the Auto Answer light is on, the HP All-in-One answers calls automatically. When the light is off, the HP All-in-One does not answer calls.

Set the number of rings before answering

If you turn on the Auto Answer setting, you can specify how many rings should occur before the HP All-in-One automatically answers the incoming call.

The Rings to Answer setting is important if you have an answering machine on the same phone line as the HP All-in-One, because you want the answering machine to answer the phone before the HP All-in-One does. The number of rings to answer for the HP All- in-One should be greater than the number of rings to answer for the answering machine.

62 Finish setting up the HP All-in-One