Chapter 12

the color blocks continue to show print quality problems after cleaning and aligning, contact HP support.

reports Print forms and

•Bluetooth information: lists the settings for the optional Bluetooth device.

•History log: contains information that might be used for diagnostic purposes if you need to call HP support.

Print fax reports

You can set up the HP All-in-One to print error reports and confirmation reports automatically for each fax you send and receive. You can also manually print system reports as you need them; these reports provide useful system information about the HP All-in-One.

By default, the HP All-in-One is set to print a report only if there is a problem with sending or receiving a fax. A confirmation message that indicates whether a fax was successfully sent appears briefly on the display after each transaction.

This section contains the following topics:

•Print fax confirmation reports

•Print fax error reports

•Print the fax log

•Print other reports

Print fax confirmation reports

If you need printed confirmation that your faxes were successfully sent, follow these instructions to enable fax confirmation before sending any faxes. Select either On Fax Send or Send & Receive.

The default fax confirmation setting is Off. This means that the HP All-in-One will not print a confirmation report for each fax sent or received. A confirmation message indicating whether a fax was successfully sent appears briefly on the display after each transaction.

To enable fax confirmation from the control panel

1.Press Setup.

2.Press to highlight Print Report, and then press OK. The Print Report menu appears.

150 Print reports and forms