Chapter 15
cover to access the pick assembly inside the automatic document feeder, clean the rollers or separator pad, and then close the cover.
To clean the rollers or separator pad
1.Remove all originals from the document feeder tray.
2.Lift the automatic document feeder cover.
This provides easy access to the rollers and separator pad, as shown below.
1Rollers
2Separator pad
3.Lightly dampen a clean
4.Use the damp cloth to wipe any residue off the rollers or separator pad.
5.Close the cover of the automatic document feeder.
Hardware setup troubleshooting
This section contains hardware troubleshooting information for the HP
Many issues are caused when the HP
Troubleshooting
Troubleshooting common setup issues
1.Disconnect the USB cable from the computer.
2.Uninstall the software (if you have already installed it).
3.Restart your computer.
4.Turn off the HP
5.Reinstall the HP
CAUTION: Do not connect the USB cable to the computer until prompted by the software installation screen.
174 Troubleshooting