Chapter 11
The following resolution settings are available for sending faxes: Fine, Very Fine, Photo, and Standard.
•Fine: provides
•Very Fine: provides the best quality fax when you are faxing documents with very fine detail. If you choose Very Fine, be aware that the faxing process takes longer to complete and you can only send
•Photo: provides the best quality fax when sending photographs in black and white. If you choose Photo, be aware that the faxing process takes longer to complete. When faxing photographs in black and white, HP recommends that you choose Photo.
•Standard: provides a lower quality fax so that the faxing process will take less time to complete.
When you exit the Fax menu, this option returns to the default setting unless you set your changes as the default.
To change the resolution from the control panel
1.Press Fax Menu.
The Enter Fax Number screen appears.
2.Enter the fax number by using the keypad, press 
to redial the last number dialed, or press 
to access speed dials.
3.Press Fax Menu again. The Fax Menu appears.
4.Press 
to highlight Resolution, and then press OK.
Press 
to highlight a resolution setting, and then press OK.
5.Press Start Fax Black.
NOTE: If you press Start Fax Color, the fax will be sent using the Fine setting.
6.When prompted, load your originals print side up and top first in the center of the document feeder tray.
7.Press Start Fax Black again.
Related topics
“Set new default settings” on page 139
Change the Lighter/Darker setting
You can change the contrast of a fax to be darker or lighter than the original. This feature is useful if you are faxing a document that is faded, washed out, or handwritten. You can darken the original by adjusting the contrast.
NOTE: The Lighter/Darker setting applies to black and white faxes only, not color faxes.
When you exit the Fax menu, this option returns to the default setting unless you set your changes as the default.
Fax
138 Use the fax features