Reinstalling the Encoder Strip

1Ensure that the encoder strip is oriented with the transparent area up, and with three holes on the left side and one hole on the right side.

2Thread the strip through the apertures in the cartridge(carriage assembly.

3With washer and nut, secure the encoder strip to the service station.

5.5mm

4Press the forward end of the encoder spring(bracket slightly inward and place the encoder strip between the tabs and over the threaded post on the encoder spring(bracket.

Spring bracket

Threaded post

Compress

Tabs

C3187(90000

Removal￿and￿Replacement 6(41￿