) How/Where to Measure the Distance
a)Power off the unit.
b)Ensure that the pinch1arm lever is in the UP position.
c)Open the window and remove the bail.
d)Slide the carriage (with both cartridges loaded) to the right until the right black and yellow strip of the carriage is above the right sideplate (see figure 1.c).
e)Carefully try to insert, one at a time, the following gauges below the left cartridge, (figure 1.b):
*0.6 mm (0.025 in) - gauge should enter without any effort
*0.7 mm (0.027 in) - gauge rubs slightly
*0.8 mm (0.031 in) - gauge may enter but the carriage is lifted when you insert the gauge.
If the results are as described above, the distance is within specifications
a) |
| Figure 1 |
| ||
Cartridge |
|
|
|
| |
| Chute |
|
|
|
|
Cartridge | b |
|
|
| c) |
Front View |
|
|
| ||
|
|
|
|
| |
c | a |
|
|
|
|
|
| 90d |
|
|
|
| Drive Roller |
|
|
|
|
| Surface |
|
|
|
|
Insert the gauges centered |
|
|
|
| |
below the left (fixed) cartridge. |
|
|
|
| |
b) | Carriage |
| Right Side Cover |
| |
Gauge |
|
|
|
| |
|
|
|
| ||
90d |
|
|
|
| |
| Ref. | Description | specs (mm) | ||
|
| ||||
| Drive Roller | a |
| nozzle platen to roller | 0.9 to 1.3 |
|
|
|
|
| |
| b |
| glue bed to platen | 0.2 | |
|
|
| |||
|
| c |
| glue bed to roller | 0.7 to 1.1 |
C3187190000 | ProductHistoryandServiceNotes 915 |