Removing the Y￿Tensioner and Housing

1Remove the window  page 6*15.

2Remove the center cover  page 6*16.

3Remove the left endcover  page 6*18.

4Slide the cartridge carriage towards the center of the plotter in order to access the tensioner.

5Remove the screw that attaches the trailing*cable guide to the tensioner housing.

Torx-15

Trailing-cable guide

Tensioner

housing

6Remove the tensioner*plate screw.

Torx-15

The tensioner plate is under spring tension. Ensure that the plate does

C A U T I O N not spring back suddenly. Hold the right end (viewed from the rear) of the tensioner plate to keep the tensioner spring compressed.

C3187*90000

Removal￿and￿Replacement 6*45￿