Removing the FrontPanel Assembly
1Remove the electronics-enclosure cover ' page 6-5.
2Remove the window ' page 6-15.
3 Remove the center cover ' page 6-16.
4Remove the right endcover ' page 6-19.
5Take note of the correct positioning of the front-panel cable for reassembling. Incorrect positioning could cause obstruction of the cartridge carriage or motor gears.
6Unclip the window-sensor cable and front-panel cable from their holding clip on the underside of the front-panel assembly.
Window-sensor
Front-panelcable cable
Clip
7Release the front-panel cable from its clamp on the main PCA, and from its holding clip on the right side of the plotter.
| C A U T I O N | Do not force the cable out of its clamp. First pull the clamp gently towards |
| you to release the cable; then pull the cable easily out of the clamp. |
| |
Do not release the frontpanel cable from its clamp on the frontpanel PCA
Front-panel connector clamp
6-32 RemovalandReplacement | C3187-90000 |
