Removing the Left Endcover
1Remove the window page 6)15, and the center cover page 6)16.
2Remove the two screws on the left front trim and the two screws on the left back trim.
Reassembling: When replacing screws on any plastic part, always begin
C A U T I O N by gently twisting the screw in anticlockwise with your hand, until the screw finds the thread path and clicks, and then twisting the screw in clockwise with your hand, before using a screwdriver. This is to avoid cross)threading. Do not over)tighten the screws.
6Remove the three screws from the left side of the left endcover.
4Maintaining an even pressure on the top and bottom of the endcover, pull it to the left, away from the plotter.
Do not let the windowpivot spring drop out of the endcover
3If the plotter is mounted on legs, loosen the two left)hand screws that attach the plotter to the legs.
6)18 RemovalandReplacement | C3187)90000 |