8Loosen the right screw and remove the left screw that attaches the stepper motor to the left sideplate.

Torx-10

RemoveLoosen

C A U T I O N

Reassembling: Do not cross'thread or over'tighten the screws.

9Move the stepper motor toward the rear of the plotter.

10Pull the stepper'motor cable gently out from the electronics enclosure, through the hole in the left side of the electronics enclosure, and lift it and the stepper motor clear of the plotter.

6'22 Removal￿and￿Replacement

C3187'90000