Removing the Trailing Cable
If you are installing a new trailing cable, make sure the main PCA is compatible with it. (Details chapter 9.)
1Remove the electronics4enclosure cover page 645.
2Remove the window page 6415.
3Remove the center cover page 6416.
4D/A14size plotters only: Open the flexible, DANGER HIGH VOLTAGE, insulation cover.
Flex the cover to open it. Do not detach the cover from the plotter.
5Disconnect the trailing4cable connector from the main PCA.
connector
6Remove the two screws that attach the toroid to the rear of the electronics enclosure.
7Pull off the two endcaps of the toroid and remove the toroid from the trailing cable.
C3187490000 | RemovalandReplacement 6429 |