HP Radio Port 220, Server Performance Pack 200 steady, LEDs lit, Cartridge, C3187590000, Corrective Options, 8510 Troubleshooting, Error Number and Description

Error and Cartridge LEDs lit and steady: Miscellaneous errors.

LEDs lit
and	Error Number and Description
steady		Corrective Options
	88. Processor fault	At the time of printing of this manual,
		this error should not occur. If it does
		occur, consult recent service notes for a
		possible solution. If no service note deals
		with this error, report the problem to the
		HP Response Center.
	28.Communication failure between the	Replace main PCA.
	main and servo processors.
	Communication occurs through the
	processor5support ASIC.
	92. Servo interrupts not occurring or not	Replace main PCA.
	reaching the main processor support
	ASIC.
	56. Error in servo5drive calculations.	Replace main PCA.
	120. Servo5processor communication	Replace main PCA.
	error.
	60. Failed communications between the	Check trailing cable connections and
	carriage and main processors.	continuity. If needed, replace trailing
		cable, main PCA or carriage assembly.
	124. The optical sensor on the carriage	Reduce ambient light. / If media is not
	has failed to locate lines drawn during	clean and reflective, change media. / If
	the cartridge calibration routine.	lines are faint, replace cartridges. / Clean
		lens. / Replace LED.
	152. Failure of cartridge5interface-	Replace main PCA.
	ASIC test.
	216. Firmware failure.	At the time of printing of this manual,
		this error should not occur. If it does
		occur, consult recent service notes for a
		possible solution. If no service note deals
		with this error, report the problem to the
		HP Response Center. Note conditions
		before error occurred. Include setup
		sheet and service configuration plot in
		report.

8510 Troubleshooting C3187590000