10If you don't need to change the trailing cable, but do need to remove it to access other parts:

aRemove the two screws that attach the trailing'cable rear tray to the top of the electronics enclosure.

Torx-20

Rear tray

cRemove the trailing'cable'bracket screw from the cartridge carriage.

Torx-10

bCarefully remove the right'hand cartridge spring from the cartridge carriage.

dPull the trailing cable up through the slot at the top of the electronics enclosure assembly and lift it, with rear tray and bracket, from the plotter.

Rear tray

Bracket

C3187'90000

Removal￿and￿Replacement 6'31￿