Clearing and Resetting the CMOS
The CMOS of the workstation stores password information and information about the workstation configuration. This section describes the steps to successfully clear and reset the CMOS.
Using Computer Setup to Reset CMOS
To reset CMOS using Computer Setup, access the Computer Setup Utilities menu. When the Computer Setup message appears in the
NOTE: If you do not press the F10 key while the message is displayed, the workstation must be restarted to access the utility.
From the Computer Setup menu, select File > Set Defaults and Exit. This restores the soft settings that include boot sequence order and other factory settings. It does not, however, force hardware rediscovery.
NOTE: The workstation passwords and any special configurations along with the system date and time will have to be reset.
Additional Password Security and Resetting CMOS G
Clearing and Resetting the CMOS 205