Optical Drive

To remove an optical drive:

1.Disconnect power from the system (page 79), remove the access panel (page 86), and remove the front bezel (page 87).

2.Disconnect the audio 1, data 2, and power 3 cables from the drive. The connector colors might be different than illustrated.

NOTE: The audio cable is only required for Linux-based systems.

3.Lift the green drivelock release lever 1 and gently slide the drive out 2 of the chassis.

4.If not installing another optical drives, replace the bezel blank.

Procedures

Removal and Replacement

Removal and Replacement of Components 107