HP xw9300 manual Hood Sensor Smart Cover Sensor, Clearing Passwords

Table 3-14National Keyboard Delimiter Characters

French	!	Norwegian	-	Turkish	.
French	é	Polish	-	U.K. English	/
Canadian
German	-	Portuguese	-	U.S. English	/

*For Bosnia-Herzegovina, Croatia, Slovenia, and Yugoslavia

Clearing Passwords

If you forget your password, you cannot access the workstation. Refer to “Additional Password Security and Resetting CMOS” on page 203 for instructions on clearing passwords.

Hood Sensor (Smart Cover Sensor)

The hood sensor is a combination of hardware and software technology that can alert you when the workstation side access panel has been removed. There are three levels of protection, as described in the following table.

Table 3-15Hood Sensor Protection Levels

Level	Setting	Description
Level 0	Disable	Hood sensor is disabled (default).
Level 1	Notify User	When the workstation is restarted, the screen displays a
		message indicating that the workstation side access panel
		has been removed.
Level 2	Password	When the workstation is restarted, the screen displays a
		message indicating that the workstation access panel has
		been removed. You must enter the setup password to
		continue.
		This option is only available if an administrator password
		is set.

NOTE: These settings can be changed using Computer Setup.

Setting the hood sensor protection level

To set the hood sensor protection level:

1.Turn on or restart the workstation.

2.As soon as the workstation is turned on, press and hold the F10 key until you enter Computer Setup. Press Enter to bypass the title screen, if necessary.

NOTE: If you do not press the F10 key at the appropriate time, you must restart the computer and press and hold the F10 key again to access the utility.

If you are using a PS/2 keyboard, you might see a Keyboard Error message—disregard it.

3.Select Security > Smart Cover > Cover Removal Sensor, then side access panel, and follow the on-screen instructions.

System Management

Desktop Management 69