HP xw9300 Data, Table, Device, Network, Password, Power-On, Password, Security, activated, Execution, System IDs, Prevention, Smart Cover, Serial Port, Service Boot

Table 3-11Computer Setup Menu Descriptions (continued)

Heading Option Description

Security Setup		Allows you to set and enable setup (administrator) password.
	Password
		NOTE: If the setup password is set, it is required to change Computer Setup options,
		flash the ROM, and make changes to certain PnP settings under Windows.
	Power-On	Allows you to set and enable power-on password.
	Password
	Smart Cover	Allows you to disable cover removal sensor or to notify user if sensor has been
		activated.
	Device	Serial Port
	Security	Specifies if device is available or hidden to the OS.
		All USB Ports
		Specifies if device is available or hidden to the OS.
		Front USB Ports
		Specifies if device is available or hidden to the OS.
		IEEE 1394 Controller
		Specifies if device is available or hidden to the OS.
		Network Controller
		Specifies if device is available or hidden to the OS.
		SCSI Controller
		Specifies if device is available or hidden to the OS.
	Network	Enables/disables the ability to boot to the network by way of the F12 key or
	Service Boot	the boot order.
	System IDs	Allows you to set:
		• Asset tag (16-byte identifier) and ownership tag (80-byte identifier displayed during
		POST).
		• Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can
		only be updated if the current chassis serial number is invalid. (These ID numbers are
		normally set in the factory and are used to uniquely identify the system.)
		• Keyboard locale setting (for example, English or German) for System ID entry.
		• Monitor tracking
	Data	Enables/disables a mode that helps prevent OS security breaches.
	Execution
	Prevention

50 System Management