Diskette Drive

To remove a diskette drive:

1.Disconnect power from the system (page 79), remove the access panel (page 86), and remove the front bezel (page 87).

2.Disconnect the data 1 and power 2 cables from the back of the diskette drive.

3.While lifting the green drivelock release tab 1, slide the drive forward 2 out of the chassis.

4.Remove the diskette drive by removing the two M3 screws 1 in the rearmost holes and sliding the diskette drive 2 from the bracket.

Procedures

Removal and Replacement

Removal and Replacement of Components 109