Intel 1520 manual Field Description

▼Adding an ICP Peer

1 Click the ICP Peers link.

2 Click the Add Entry button.

3 Enter the information for the ICP peer host. If you want to clear the entire form of information, you can press the Reset button.

Field	Description
Hostname	The hostname for the ICP host. You do not have to enter
	a hostname if you know the host IP address.
	If you enter a hostname but leave the IP address as
	0.0.0.0, the ICP configuration obtains the host IP
	address via a DNS lookup on the entered hostname.
	Therefore, if you do not know the IP address, simply
	leave it as 0.0.0.0.
Host IP	The host IP address.
	If you enter an IP address other than 0.0.0.0, the ICP
	configuration uses the IP address to identify the host.
	Otherwise, the ICP configuration requires a hostname.
Type	ICP host type. Use one of the following options:
	❚ 1 specifies a parent cache
	❚ 2 specifies a sibling cache
	❚ 3 specifies the local host
	Option 3 is reserved for the appliance. In option 3, the
	hostname must be localhost and the host IP address
	must be 0.0.0.0. The ICP configuration enforces this
	convention.
Proxy Port	The appliance’s proxy port (usually 8080).
ICP Port	The UDP port used for ICP (usually 3130).
Multicast Member	Indicates whether the host is on a multicast network with
	the appliance. Use one of the following options:
	❚ No
	❚ Yes
Multicast IP	The multicast IP address.
Multicast TTL	The multicast datagram time to live. Use one of the
	following options:
	❚ 1: specifies that IP multicast datagrams will not be
	forwarded beyond a single subnetwork.
	❚ 2: allows delivery of IP multicast datagrams to more
	than one subnet if there are one or more multicast
	routers attached to the first hop subnet.

4Click the Add button to save your changes.

42Intel NetStructure Cache Appliance Administrator’s Guide