Chapter 2 Getting Started 11
installation, the bottom of the screen keeps you apprised of the installation’s
progress.
17 After the installation is complete, use the arrow keys to position the cursor on
commit as follows:
setup Initial Intel Cache Setup
install Install Intel Cache
–commit Commit Setup Changes
18 Pressing the Enter key starts the final phase of the initialization process as
well as the cache application. The bottom of the screen indicates that the
cache application has started and prompts you to press the Enter key a second
time.
19 When the Initialization Complete! prompt appears, press the Enter
key to reboot the appliance. Rebooting the appliance takes several minutes.
During the reboot process, random characters might appear in the window of
the VT100 terminal emulator screen.
20 After your system completes the boot procedure, a console login prompt
appears with fields for both a login and password. At the prompt, supply
admin for both the login and password, and press Enter.
21 After the login completes, the initial menu appears with additional selections:
setup Initial Intel Cache Setup
–main Main Intel Cache Controls
config Intel Cache Configuration
monitor View Statistics
expert Enter Expert Mode
save Save Config to Floppy
load Load Config from Floppy
logoff Logoff
Note The system starts with factory settings. You can further configure or customize
the appliance by following the guidelines in Chapter 4‚ Configuring the
Appliance.
Once the software is running, you can access the system through a web browser
by using the system’s IP Address with an appended :8081 as the URL. For
information on accessing the manager UI, refer to Accessing the Manager UI‚ on
page 12.