Konica Minolta 7013 manual Settings for reception, Print settings

Settings for reception

Print settings

You can set three parameters for printing received fax messages:

•Print reduction rate

•Reduction margin

•Paper save function

You set all three in the same procedure, discussed on next page. Following is a explanation for each:

Print reduction rate

Print reduction lets you set the machine to reduce large incoming documents to a size that fits the paper in your machine. (This setting doesn’t affect copies you may make with your machine.)

Below are the options for the print reduction rate for fax reception:

Setting	What it does
	Automatically reduces printouts at variable rates down to a
Auto	minimum of 50%. Tries to reduce printout to fit on one sheet of
	your selected paper size. If it can’t, print the image at 100% size
	on two or more pages.
100%	Does not reduce documents. (Due to the sender’s TTI, this may print
	two pages when receiving a one-page fax document.)

Reduction margin

Your machine’s reduction margin is measured in millimeters (mm). We’ll define reduction margin by explaining how it’s used:

When a fax message enters your machine’s electronic brain, the machine measures the message’s length and compares it to (a) the length of your selected paper (not include the print margins) plus (b) the reduction margin you set. If the length of the incoming message is shorter than (a) and (b) put together, your machine prints the message on just one sheet.

If it’s longer, your machine prints the message on more than one sheet.

Note: An Auto reduction setting and a reduction margin setting of 24 mm will print most incoming faxes as single pages. Try this combination first and then, only if you have problems with it, select different settings.

Changing the default settings

Half-page reception

Half-page reception can conserve paper if some of the faxes you receive are half- page, “memo-sized” messages. When activated, this feature tells the machine to combine two of these half-page receptions onto a single sheet. Half-page reception only combines half-page messages sent back-to-back during the same transmission. It won’t combine two half-page faxes from separate transmissions.

To adjust the print settings

Default setting: Rx reduction rate: Auto, Reduction margin: 24 mm, Half-page reception: Off

1	Press Program key, B, 2, 0, 2, ENTER. The LCD shows the current print
	reduction rate:
		Rx Reduc.Rate	:Auto
		/	/Enter
2
	Press or until the reduction setting you want appears.
	In this example, we’ve chosen 100%.
		Rx Reduc.Rate	:100%
		/	/Enter
3
	Press ENTER to save the setting. The LCD shows the current reduction margin:
		Margin
		(00-85mm):24
4
	Use the numeric keypad to enter the reduction margin you want. If
	necessary, press or		to move the cursor. In this example, we’ve chosen
	38mm.
		Margin
		(00-85mm):38
5
	Press ENTER to save the setting. The LCD shows the current setting for
	half-page reception:
		Half Page Recpt.:Off
		/	/Enter

4.3