Konica Minolta 7013 manual Your Fax Number, Your Name, Phone Type Tone, Fax Ready Enter

7	The LCD now asks you to enter your fax number as you want it to appear on
	other fax machines’ displays or printouts. The fax industry term for this
	number is Subscriber ID.
			Your Fax Number
8
	Use the numeric keypad to enter the fax number. The number may contain up
	to 20 characters.
			Your Fax Number
		9725555525_
	Note: If you make a mistake, press CANCEL to erase to the left.
				To change just one number, press to move left, or to move right.
				Press CANCEL to erase the number. Then re-enter the fax number cor-
				rectly.
9	Press ENTER to save the number.
10	The LCD now asks you to enter the name you want to appear at the top of
	faxes you send. The name may be up to 22 characters in length.
	Use the one-touch keys to enter letters and other non-numeric characters.
	(Refer to “Entering characters” on page 1.12.)
			Your Name		;Upper
		_
11
	Press ENTER to save the setting and continue.
12	The LCD now shows the type of dialling:
			Phone Type		:Tone
				←/→/Enter
13
	Press ENTER and continue.
14	The LCD now shows the machine’s current reception mode.
			Fax Ready		/ /Enter
15
	For now, press or				until the setting Fax Ready appears. (This setting can
	always be changed. We’ll discuss reception modes further on pages 2.10–2.11.)
16	Press ENTER to save the setting and continue.

			Getting started
17	The LCD now asks you to enter the time for the sleep mode. Your machine will
	automatically enter sleep mode after your selected idle time has elapsed.
		Sleep Mode Timing
		(001-240):005
18
	Enter the time (in minutes) using the numeric keypad.
19	Press ENTER to save the setting. Your machine will return to standby mode.

1.19