Konica Minolta 7013 manual Making copies, Your machine’s copier features, Basic copy procedure

Basic operation

Making copies

Your machine’s copier features

Your machine has the following copier features:

•Single copy (see the right column on this page)

•Stacking multiple copies (see page 2.13)

•Sorting multiple copies (see page 2.13)

•Enlarged or reduced copies (see page 2.13)

•Negative/positive copy (Reverse black and white areas) (see page 2.17)

Basic copy procedure

1	Press COPY/FAX to change to	COPY/FAX key
	Copy mode.

When the machine is in the Copy mode, the LCD shows:

￿￿￿￿￿￿ ￿￿￿￿ Number of copies

Copy reduction or enlargement ratio

Recording paper size

Document size

Note: For details about each item, see “Making copy settings,” pages 2.15–2.16

2 Place your original document in ADF face up, or on the platen glass face down just as you would to send a fax.

3 Enter the document size by pressing the DOCUMENT SIZE.

4 As needed, set the following:

•Select document type and adjust image contrast

•Enter the number of copies

•Set copy reduction or enlargement ratio

Note: For details about each item, see “Making copy settings,” pages 2.15–2.16.

5 Press START.

Note: To reset the copy parameter to default setting, press COPY RESET.

Note: To stop the copying, press STOP.

Single copy

1	Press COPY/FAX to change to Copy mode.
2	Place your original document in ADF face up, or on the platen glass face
	down just as you would to send a fax.
3	If you are using platen glass, enter the document size by pressing the
	DOCUMENT SIZE.
4	As needed, set the following:
	• Select document type and adjust image contrast
	• Set copy reduction or enlargement ratio
	Note: If you want to enlarge copy, use the platen glass.
5	Press START.

2.12