Konica Minolta 7013 manual Operating tips, Changing modes, Turning off the power

Operating tips

Changing modes

You can use this machine not only as a

fax machine, but as a copier as well. COPY/FAX key Press COPY/FAX to change to the fax

mode or copy mode.

Fax mode: If you want to use facsimile features, change to the Fax mode.

Copy mode: If you want to use copier function, change to the Copy mode.

When the machine is in the Fax mode,

the FAX light on the control panel is on, and if the machine is in the Copy mode, the COPY light is on.

Note: You cannot switch modes in any of the following cases:

•When scanning a fax message for transmission.

•During the real time transmission.

•When programming any function settings.

Standby display of each mode:

Fax Ready		Copy	Ready	1
1 Jan 2001	0:00	A4	Auto	100%
In Fax mode			In Copy mode

Turning off the power

Fax documents stored in memory will be lost 72 hours after you turn the power switch off or unplug the power cord. (See “Specifications,” page AI.1.)

Getting started

How to operate the machine

To press:	0 (zero), 1, 2, 3, 4, 5, 6, 7, 8, 9, # or *
Use:	The numeric keypad.
Tip:	At no other time within this manual will we refer to the letters printed
	below the numeric keys and their uses (such as accessing abc by pressing
	the 2 key.) These letters are there only for your convenience in using your
	fax machine as a telephone.
To press:	A, B, C, D or any other letter key
Use:	The one-touch key labeled with that letter.
Tip:	Please don’t confuse the zero (0) with the letter O.

Here’s an example. If we say “press Program key, A, 1, 0, 1, ENTER” …

…you’d press Program key

…then A (one-touch key 01(A))

…then 1

…then 0 (the numeric key zero)

…then 1

…and then ENTER

Note: Even though our example above includes commas, do not enter them into the fax machine. Those characters appear in our instructions to separate one number from the other. They do not need to be entered into your fax machine.

There is a function (broadcasting) which requires commas to be entered, but there is a special way to enter them. We’ll explain this process later.

In other way, you can search almost all of your machine’s function using the cursor key. See page 1.13.

1.11