Konica Minolta 7013 manual Changing the copy auto reset time, Setting copy auto, Setting sort copy

Changing the copy auto reset time

Default setting: 3 minutes

The machine returns to its initial condition automatically after a certain period of time. You can change this time from 1 to 10 minutes.

1 Press Program key, B, 3, 0, 3, ENTER.

Auto Reset Time (01-10):03

2 Use the numeric keypad to enter the time you want for the copy auto reset. Here, we’ve chosen ten minutes.

Auto Reset Time (01-10):10

Note: Enter a leading zero when entering a quantity less than 10.

3 Press ENTER to save the setting.

Setting copy auto

Default setting: Auto is set for Recording paper size

The machine automatically selects the recording paper size according to the docu- ment size and enlargement/reduction rate. You can change it to select the document size or enlargement/reduction rate automatically, instead of the recording paper size.

1	Press Program key, B, 3, 0, 4, ENTER. The LCD asks you to select the item
	you want to set to Auto:
		Copy Auto:Paper Size
		/ /Enter
2
	Press or until the item you want appears. In this example, we’ve chosen
	Document size.
		Copy Auto:Doc. Size
		/ /Enter
3
	Press ENTER to save the setting.

Changing the default settings

Setting sort copy

Default setting: On

You can set the sort setting to off for default setting by following procedure.

1 Press Program key, B, 3, 0, 6, ENTER.

Sort Copy	:On
/	/Enter

2 Press or until the setting you want appears. In this example, we’ve chosen Off.

Sort Copy	:Off
/	/Enter

3 Press ENTER to save the setting.

Helpful Tip: You can override the setting of sort copy by pressing SORT before you press START to make copies.

Setting Negative/Positive

Default setting: Off

If you frequently use the Negative/Positive (reversing black and white areas), you can set it to on for default setting by following procedure.

1	Press Program key, B, 3, 0, 7, ENTER.
		Nega/Posi	:Off
		/	/Enter
2
	Press or until the setting you want appears.
	In this example, we’ve chosen On.
		Nega/Posi	:On
		/	/Enter
3
	Press ENTER to save the setting. The machine returns to the standby mode
	with following display:

Copy <Nega/Posi> 1

A4 Auto 100%

4.7