Konica Minolta 7013 manual Control Panel Overview, Message report

Getting started

Control Panel Overview

1 2 3 4 5 6 7 8 9 10 11 12 13 14

28

27

26

25

24

23

22

21

20

19

18 17

16

15

1 COPY light — Glows when the machine is in the Copy mode.

7

COPY COUNT — Pressing this key will make you see the number of total

2

FAX light — Glows when the machine is in the Fax mode.

8

printed pages on the LCD.

MONITOR/CALL — Pressing this key will turn the monitor speaker on or off.

ALARM light — Glows when a problem occurs during fax communication,

When it’s on, it allows you to hear the call you’re making. When using this

feature, you can only hear the communication taking place.

3 printing or scanning. The light stays on until the machine prints a Check

BROADCAST — Pressing this key will send a broadcast fax (sending the same

Message report.

9 document to more than one location).

4

COMM. light — Glows when the machine is communicating with another

GROUP — Press this to set up a fax transmission to a call group, a set of fax

machine.

10 numbers which will receive the same document in one fax operation.

5

MEMORY RECEIVE light — Glows when the machine is receiving an incoming

11

ADVANCED FUNCTIONS —

fax document into its electronic memory.

In Fax mode: Chooses from following several fax options – delayed transmis-

Soft Keys — Shortcut keys. Any function that can be turned on or off can be

sion, Polling, F-Code transmission, F-Code polling and Batch transmission.

6 programmed into these three keys. If the light above one of these keys glows,

Or, in Copy mode: You can use Nega/Posi copy.

this indicates the setting that’s been programmed into it (see page 3.16) is

12

turned on. These keys are programmed at the factory to turn the following

COMM. CANCEL/CONFIRM. — Pressing this key will stop the transmission, or to

functions on or off:

review pending fax commands and the activity journal.

Soft key 1: SORT — Pressing this key will turn the Sort feature on or off.

13

START — Pressing this key will begin a fax transmission, reception or copying.

Note: If the optional printer controller has been installed on your machine,

14

STOP — Stops the current operation and ejects a document from the ADF.

this key will be the ONLINE key.

Soft key 2: FAX&COPY — Pressing this key will turn the Fax & Copy feature on

15

COPY RESET — Use in copy mode only. Pressing this key will reset the copy

or off. (Page 3.20.)

Soft key 3: BYPASS — Pressing this key will change the paper size in the

settings to their defaults.

bypass tray. (Page 1.10.)

1.3