Konica Minolta 7013 manual M2Name, M2 Name Upper Delayed

Press ENTER to save the setting.

Example 2: To program the operations for printing the one-touch numbers

list: Press Program key, E, 1, 0, 6, ENTER.

7 If you programmed ENTER or START into the operation, proceed to step 8. Otherwise, press MACRO PROGRAM and skip to step 9.

8 If you want to start immediately after pressing the Macro key when you use it, press ENTER. If not, press CANCEL.

Advanced features

6 Press the keys exactly as you operate the job you want to program into the Macro key.

Note: You can program up to 60 steps. When it comes over 60 steps, your fax machine asks if you register the operations you have entered. If you want to register them, press ENTER. If not, press STOP.

Note: If you want to cancel the operations you have set, press

MACRO PROGRAM, STOP and then go back to step 1.

Example 1: To program some operations for copy: Press COPY/FAX to change the copy mode, and set number of the copies, paper size, contrast, resolution, reduction/enlargement rate and sort setting as you want.

Note: See “Making copies” (pages 2.12–2.17) for detail operations.

Note: If you want to confirm the settings or operations in the Macro key before you start it, press CANCEL here.

Copying with the Macro key

To copy using a Macro key: 1 Insert the document.

2 Press the Macro key in which you’ve stored the copy command.

3 Press START, if you have not registered START in the Macro key.

Printing lists using the Macro key

To print a list using a Macro key:

1 Press the Macro key in which is programmed for the printing lists. 2 Press ENTER, if you have not registered ENTER in the Macro key.

Storing fax documents with the Macro key

To store a fax document for either polling or F-Code polling using a Macro key: 1 Insert the document.

2 Press the Macro key which is programmed for the storing operation you want to use.

Include Start/Enter? Check Enter/Cancel

9 The LCD now shows:

M2:Name	;Upper
_

or

M2: Name ;Upper Delayed_

3 Press ENTER, if you have not registered ENTER in the Macro key.

Fax dialing with the Macro key

To dial a fax call using a Macro key: 1 Insert the document.

The machine now asks you to name this job.

If you do not want to enter or change this job’s name, skip to step 11.

10 Enter the name by using the one-touch keys. (If necessary, review “Entering characters”, page 1.12) A job’s name may be up to 130 characters in length.

11

2 Press the Macro key in which you’ve stored the fax communication com- mand.

3 Press START, if you have not registered START in the Macro key.

Your fax will perform the operation now, or at whatever time you programmed. If you programmed this key to delay its operation, the LCD shows:

If you programmed this key to perform the operation immediately after you press it, the LCD shows the number:

3.18