Contrast, Memory Tx, Report, Cover, Fax & Copy

12 If you want the transmission to begin immediately every time you press the key, press ENTER and skip to step 15.

If you want to delay the transmission, press ADVANCED FUNCTIONS, ENTER.

13 Next, tell your fax to carry out this delayed command one of these ways: Option 1: Perform the command once at a certain time on a certain day of

the month. (For example, “Do this at 5:05 PM on the 30th.”)

To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:

Enter Time: 30/17:05

Option 2: Perform the command at a certain time each day you press the key. (For example, “Do this at 5:05 PM today.”)

To select this option, use the numeric keypad to enter 0, 0 and then the time when the fax should perform the command:

Enter Time: 00/17:05

14	Press ENTER, ENTER.
15	The LCD asks if you want to make additional settings for this programmable
	one-touch number.

		Option	:Off
		/	/Enter

	If you do not want to make additional settings, press ENTER. Skip to step 29.
	If you do want to make additional settings, press and ENTER.
16	The LCD asks which resolution you want to use for this programmable one-
	touch number.
		Resolution	:------
		/	/Enter
17
17	Press until the mode you want appears.
	Note: For any of the following settings, choose “-----” if you do not want to
		specify the displayed setting for this programmable one-touch key.

						Advanced features
18	Press ENTER. The LCD asks you to select a contrast mode for each programma-
	ble one-touch number.

		Contrast		:-------
				/	/Enter
19
19	Press		until the mode you want appears.
20	Press ENTER. The LCD asks if you want the memory transmission on or off
	when using this programmable one-touch number.
		Memory Tx			:---
				/	/Enter
21
21	Press		until the mode you want appears.
22	Press ENTER. The LCD asks you for the type of confirmation report you want to
	set for this programmable one-touch number.
		Report			:---
				/	/Enter
23
23	Press		until the mode you want appears.
24	Press ENTER. The LCD asks if you want to send a cover page for this program-
	mable one-touch number.
		Cover Page			:---
				/	/Enter
25
25	Press		until the mode you want appears.
26	Press ENTER. The LCD asks if you want to turn the Fax & Copy feature on or
	off for this programmable one-touch number.
		Fax & Copy			:---
				/	/Enter

	Note: When the memory transmission is set to off in step 20, this LCD will
			not appear and go to step 29.
27	Press		until the mode you want appears.
28	Press ENTER.
29	Press STOP to return your machine to standby mode.

3.41

Konica Minolta 7013 manual Contrast, Memory Tx, Report, Cover, Fax & Copy